Download Brochure

View our brochure library

MSWGZ (ROOF)

MSWGZ (ROOF)

  • Roof to roof expansion joint cover
  • Joint Wide: 50 - 500mm
  • Movement capability: 25, 37, 50, 62, 75, 100, 125, 150, 175, 200, 225, 250
  • Materials: Aluminum: ASTM 6063T5 Mill finish.
View Product Details
MSDGJ (FLOOR)

MSDGJ (FLOOR)

  • Floor to floor expansion joint cover
  • Joint Wide: 50, 75, 100, 125, 150, 200, 250mm
  • Movement capability: 140, 140, 185, 190, 240, 290mm
  • Load Capacity (KN): 50, 20, 10
  • Materials: Aluminum: ASTM 6063T5 Mill finish. 
View Product Details
MSQG (WALL)

MSQG (WALL)

  • Wall to wall expansion joint cover
  • Joint Wide: 50 - 250mm
  • Designed for interior wall and ceiling
  • Total Movement capability: 140, 100, 130, 180, 230
  • Materials: Aluminum: ASTM 6063T5 Mill finish. 
View Product Details
MSD-QGJS (FLOOR TO WALL)

MSD-QGJS (FLOOR TO WALL)

  • Floor to wall expansion joint cover
  • Joint Wide: 50 - 175mm
  • Total Movement capability: 125 - 175
  • Materials: Aluminum: ASTM 6063T5 Mill finish. 
View Product Details
EUCOLASTIC 1NS

EUCOLASTIC 1NS

  • Polyurethane Hybrid Sealant 
  • Movement Capability (ASTM C 719): +/- 35%
  • Color: Base: grey color
  • Interior and exterior applications
View Product Details
Pidiseal PS 41G

Pidiseal PS 41G

  • Polysulphide Sealant 
  • Elongation at break, (%): 500 – 600 (ASTM D 412)
  • Color: Base: Off white, Accelerator: Dark brown to black
  • Movement Accommodation Factor: 25 % for butt joints and 50 % for lap joints
View Product Details
IE Filler Board

IE Filler Board

  • Density: 50 Kg/m3 (ISO 845)
  • Tensile Strength: 0.44 Mpa (ISO 1798)
  • Elongation at break: 100% (ISO 1798)
View Product Details
PVC Water Stopper

PVC Water Stopper

  • PVC water stops 
  • Elongation at break (BS2782:320A):  >320%
  • Specific Gravity (g/cm3) ISL 62: 1.41
  • Movement capability ASTM C719: ±25%
  • Color: Orange 
View Product Details
Backer Rod

Backer Rod

  • Polyethylene Filler 
  • Density : 33 Kg/m3
  • Tensile strength: 0.18 N/mm2
  • Elongation: 80%
View Product Details
Master Seal 930

Master Seal 930

  • Sealing system for irregular and unconventional joints 
  • Elongation at break (EN ISL 527 -1): >400%
  • Tensile Strength (EN ISO 527 -1): >6N/mm2 
  • Cost effective, Easy to apply
  • Can be applied horizontally, vertically, and even overhead.
View Product Details
MasterSeal 473U

MasterSeal 473U

  • Polyurethane sealant 
  • Expansion and movement joints in floors and Walls
  • Elongation at break (23° C / 50% RH):  >500%
  • Specific Gravity: 1.25
  • Movement capability ASTM C719: ±25%
View Product Details
Master Inject 1333

Master Inject 1333

  • Low viscosity epoxy resin
  • Compressive Strength: 70 Mpa (ASTM D 695)
  • Density (mixed): 1.05-1.09 kg/L
View Product Details
Master Inject 1315

Master Inject 1315

  • Low viscosity epoxy resin
  • Compressive Strength: 70 Mpa @ 7 days (ASTM C579)
  • Density (mixed): 1.05kg/L
View Product Details
Conbextra EP10(M)

Conbextra EP10(M)

  • Low viscosity epoxy resin
  • Compressive Strength: 60 Nmm2 (ASTM D 695)
  • Density (Kg/M3): 1060
View Product Details
ReCon PH

ReCon PH

  • Fair face mortar 
  • Fresh wet Density: 1.90kg/Ltr +/-0.05
  • Compressive strength: 45 N/mm2 at 28 days (BSEN 12350-6)
  • Color: Gray 
View Product Details
CP2 LGR

CP2 LGR

  • Fair face Plaster
  • Fresh wet Density: Wet: 1.78 kg/Ltr Dry: 1.65 Kg/Ltr
  • Compressive strength: 2.50 N/mm2 at 28 days 
  • Color: Grey colored granular powder
View Product Details
Renderoc RG

Renderoc RG

  • Micro Concrete 
  • Fresh wet density: 2100 - 2200 kg/m3
  • Compressive strength: 50 N/mm2 at 28 days (BS 4551-80)
View Product Details
DEL 090

DEL 090

  • Double Component Low Viscosity Dry Epoxy Injection Agent
  • Density: 1.18
  • Compressive strength: 117 N/mm2 (KS M 3015)
  • Tensile strength: 56N/ mm2 (KS F 4923)
View Product Details
DEP 009

DEP 009

  • Two-Component Dry Sealant for Crack and Steel Plate Reinforcement
  • Density: 1.74
  • Compressive strength: 53 N/mm2 (KS M 3015)
  • Tensile strength: 21.2N/ mm2 (KS F 4923)
View Product Details
Master Emaco S346

Master Emaco S346

  • Dual Shrinkage Micro Concrete 
  • Color: Powder Grey
  • Density: Approx. 2250Kg/M3
  • Compressive strength: 40MPa (28 Days) 
  • Volume stable in wet and hardened states reducing the cracking tendency
View Product Details
Master Emaco S488

Master Emaco S488

  • Structural Repair Mortar 
  • Color: Powder Grey
  • Compressive strength: 60N/mm2 (28 Days) 
  • Perfect bonding to the concrete and steel
View Product Details
Tamms forms & pour

Tamms forms & pour

  • Non-shrink Micro Concrete 
  • Color: Powder Grey
  • Compressive strength: 50MPa (28 Days) – ASTM C 109
  • Horizontal surfaces and formed vertical and overhead surfaces
View Product Details
Dural 452 LV

Dural 452 LV

  • Low viscosity epoxy adhesive
  • Color: Amber/Clear
  • Compressive strength: 83.2MPa (7 Days) – ASTM D 695
  • Injection resin for cracked, structural substrates
View Product Details
Injection Syringe

Injection Syringe

  • Low-Pressure injection 
  • Pressure: 3.0 Kgf/cm2
  • Weight: 40g
  • Capacity: 50ml/ cc
  • It is used for injecting epoxy into small cracks in large areas. 
View Product Details